Axxess-interface ASWC Uživatelský manuál Strana 6

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 20
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 5
6
Section 1: Installation
Onceyouhavecollectedorprintedouttheinformationsheetonyour
particularvehiclefromtheAxxesswebsite(www.axxessinterface.com)
you’rereadytoinstalltheASWC.
Installing the ASWC
1) ConnecttheBlackwireoftheASWCtoground.Youmayusethe
samegroundingpointastheaftermarketradio.
2) ConnecttheRedwireoftheASWCtoa12-voltaccessorywire,one
thatturns“on”and“offwiththeignitionkey.
3) LocatethecorrectSWCwire(s)inthevehicle’sradioprimaryor
secondaryharnessasdescribedinthevehicleinformationsheet
foundontheAxxesswebsite.Connectthecorrectwirecolor(s)from
theASWCtothesteeringwheelcontrolwire(s)inthevehicle.
Note: Metra recommends that the wire(s) are soldered for the
best and most secure connection. T-Taps or scotch locks are not
recommended due to the higher chance of an intermitted connection
or change in resistive values.
Zobrazit stránku 5
1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Komentáře k této Příručce

Žádné komentáře